Hydro-Flo Products, Inc.
Products
DynaForce Series
Camus Hydronics, Ltd.
The DynaForce series from Camus Hydronics features models that range from 300,000 up to 5 million
BTU with a 5 to 1 turndown.
The DynaForce has an efficiency rating of up to 99% and a heat exchanger which is constructed
entirely of stainless steel. The DynaForce is available for hydronic heating and domestic hot
water heating and can be fired with both natural gas or propane.
Impact Series
Bell & Gossett - ITT
The most efficient system in the market. The unique, self-cleaning impeller and casing are
specifically configured to process solids more easily and reduce clogging. The pumps consume
less energy and hold up longer, even in high demand conditions.
Reduced maintenance. Better processing of solids means less clogging, reducing costly maintenance
activities. Minimized costly downtime allows for better use of your maintenance resources.
Greater durability for lower operating costs. The air-filled motor, dual mechanical seal and specially
designed seal chamber improve overall pump efficiency and durability. This means less wear over longer
periods of time, reducing overall energy costs. The seals also last longer, with better leak detection,
and feature hard faces that endure abrasive conditions found in wastewater applications.
TechnoForce Series
Bell & Gossett - ITT
TechnoForce Pump Packages are designed around your exact needs. They allow
building owners, contractors and engineers to easily select the booster package
with precisely the right performance. They are easy to install, set up and
are designed to communicate and work seamlessly in both new and retrofit
applications. It’s easy to work with us to provide you with exactly the pump
station you need.
The TechnoForce provides potable pressure boosting through 1600 gpm
and up to 300 PSI for a variety of applications including high rise buildings,
educational institutions, hospitals and light industrial use.
ecocirc e3 Series
Bell & Gossett - ITT
The first pump to run off of 10 watts - about the same as a night light!
The ecocirc pumps’ highly efficient ECM (Electronically Commutated Motor) design results in
significant energy savings with improved performance.
Through microprocessor technology, the motor is provided the precise frequency and voltage for
optimum performance. A permanent magnet motor eliminates the requirement for input power to
magnetize the rotor, thus maximizing efficiency. This unique design offers superior starting
torque when compared with standard induction motor type pumps.
DynaFlame Series
Camus Hydronics, Ltd.
The DynaFlame series from Camus Hydronics is the new leading edge product with models ranging from 500K(BTU)
up to 6 million (first in the industry for this style of Boiler/Water Heater).
The new DynaFlame is available in condensing mode with thermal efficiencies up to
95%, near-condensing 88%, or non-condensing 85% efficiency models. The DynaFlame product is fully modulating
and automatically adjusts the unit output based on the system demand. These units
can be moved through a standard 30" doorway. DynaFlame boilers exceed any emission
standard by achieving extremely low NOx levels of less than 10 ppm.
VSX Platform
Bell & Gossett - ITT
The VSX platform offers maintenance-free bearings, new one-piece unitized seal, groutless
base plate, alignment-friendly coupling, and reduced pump room footprint by up to 40% when
compared to traditional split-case and vertical inline pumps.
Simply select your hydraulic requirements and then pick any one of three different
suction and discharge flange orientations that best suit your installation requirements.
Only the VSX platform offers so many installation options, thanks to its revolutionary design.
Using CFD technology, the VSX platform can deliver identical performance in any flange configuration. The
result is that you can maximize your piping possibilities and meet a broad hydraulic range
for chillers, towers, distributive and general pumping requirements.
Delta Cooling Towers
Delta Cooling Towers
Delta Cooling Towers are made from a corrosion proof engineered plastic.
The cooling tower shell will never rust, flake, chip, peel or ever need
painting or protective coatings applied.
Delta manufactures a totally seamless cooling tower. Delta towers are the only
large packaged cooling towers in the industry that have a “one-piece” shell.
This means there are no seams, panels, rivets, or hundreds of fasteners to fail
or compromise the performance or integrity of the product.
Delta provides a 15 year warranty on the cooling towers structural shell. In addition,
Delta’s cooling tower motors have a 5 year warranty.
Celebrating 53 years of dedicated service!
We Represent the Following Manufacturers
- Bell & Gossett - Xylem
- Domestic - Xylem
- Hoffman Specialty - Xylem
- McDonnell & Miller - Xylem
- Goulds - Xylem
- Advanced Thermal Systems
- Aegis
- Boston Metal Products
- Camus Hydronics, Ltd.
- Cemline
- Crete-Heat
- Delta Cooling Towers
- Dow
- Dynasonics
- Fernox
- Flow Conditioning
- Flow Design Inc.
- Heat-Flo
- Heat-Timer
- HG Spec
- Holby
- Keckley
- Kinetics Noise Control
- Microflex Inc.
- MIFAB
- Mr. PEX Systems
- Myson
- NY Thermal, Inc.
- Petersen Equipment
- Preso Meters
- Proco
- Protech Systems
- Puroflux
- Racine Vortex
- R.S. Corcoran Company
- Tigerflow
- Trerice
- Twin City Hose Inc.
- UV Pure
- Venmar
- Weil Pump Company
- Wessels Company
- Wheeler Tank Manufacturing
- Winters Instruments